Star Drywall Repair
Drywall Installation & Replacement in Star, ID
Drywall installation and full-section replacement in Star, ID for additions, remodels, and water-damaged walls. Free written estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Star and nearby communities.
Star Drywall Repair hangs and finishes new drywall for additions, remodels, and full-section replacement where a patch won't cut it. With Star's population more than doubling over the last decade, a lot of our install calls come from garage conversions, basement finishes, and new rooms being added onto homes built in the recent construction boom.
We match panel thickness to the existing room, tape every seam, and carry the job through primer so the new wall reads the same as the rest of the house.
What's included
What's Included
Typically included: measuring and hanging new panels, taping and multi-coat finishing, sanding, primer, texture matching to adjacent walls. Optional: fire-rated or moisture-resistant board where the room calls for it, full-room repaint beyond the patched section. Customer prep: clear the work area of furniture and breakables, confirm any existing permit paperwork if this ties into a larger remodel.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Drywall Installation & Replacement Process Works
Step 1Measurement And Planning
Wall dimensions are measured to determine panel count and layout.
Step 2Old Material Removal
Existing drywall is removed where a full section needs replacing.
Step 3Framing Check
Studs and framing are inspected for alignment before panels go up.
Step 4Panel Installation
New drywall sheets are secured firmly to the frame.
Step 5Seam Finishing
Joints are taped and coated across multiple drying passes.
Step 6Priming And Painting
The new wall is primed and painted to complete the installation.
Materials
Materials and Methods for Drywall Installation & Replacement
Drywall Sheets
Standard panels sized to match existing wall thickness for a flush, even surface.
Screws
Properly spaced fasteners that hold panels tight to framing without popping later.
Joint Tape
Reinforces every seam between new panels so cracks don't reappear as the house settles.
Joint Compound
Applied in layered coats to smooth seams and fastener holes before sanding.
Primer
Seals new drywall evenly so paint color and sheen match the rest of the room.
Interior Paint
Finishes the install so the new section blends into the existing space.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Drywall Installation & Replacement Take?
A small room addition or single-wall replacement runs over a few days once compound drying is factored in.
- 01
Site visit and estimate
same day - 02
Hanging new panels
1 day - 03
Taping and first coat
same daydries overnight
- 04
Second and third compound coats
2 days1 to
- 05
Texture and paint-ready
1 dayafter final sanding
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and Codes for Drywall Installation & Replacement
Star sits mostly in Ada County with edges reaching into Canyon County, so permit requirements can differ by exact address. Confirm with the applicable county before larger installation jobs.
| Typically needs a permit | Often no permit |
|---|---|
| New room drywall tied to an addition or finished basement | Replacing an existing damaged wall or ceiling section in place |
| Drywall work that's part of a permitted remodel or structural change | Garage or utility room drywall that isn't part of a larger remodel |
Need help with permits?
Get a Free EstimateCost
What Does a Drywall Installation & Replacement Cost in Star, ID?
Cost scales with square footage, panel type, and how many compound coats a smooth finish needs.
| Project type | Typical range | What’s included |
|---|---|---|
| Small section replacement | $400–$900, | single wall or closet-sized area. |
| Room addition or garage conversion | $1,500–$4,000, | full hang, tape, and finish. |
| Basement finish drywall | $2,500–$6,000+ | , multiple rooms and ceiling runs. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateNext step
Get a free estimate for an exact number based on your project.
DIY vs pro
DIY vs Hiring a Pro for Drywall Installation & Replacement
| DIY | Hire a pro |
|---|---|
| Hanging a single small panel in a closet or utility space. | Full rooms or additions where flat, even seams matter for resale value. |
| Basic taping on a short, low-visibility seam. | Any job requiring texture matching to blend with existing walls. |
| — | Situations where fire-rated or moisture-resistant board is code-required. |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Drywall Installation & Replacement
Call Star Drywall Repair or request a free estimate to get your installation scheduled.
- You're adding a room or finishing a basement and need drywall hung and finished.
- A wall section is too far gone to patch and needs full replacement.
- You want a smooth result that blends with existing texture, not a visible repair line.
Seeing warning signs?
Get a Free EstimateFAQs
Drywall Installation & Replacement FAQs
How much does drywall installation cost in Star?
Small section replacements run $400–$900, while full room additions or garage conversions typically land between $1,500 and $4,000 depending on size and finish.
How long does a full room installation take?
Plan on several days for hanging, multiple compound coats with drying time between each, and a final texture and paint-ready stage.
Do I need a permit for new drywall?
If the drywall is part of an addition, basement finish, or permitted remodel, yes. Simple replacement of an existing damaged section usually doesn't need one.
Can new drywall match my home's existing texture?
We identify the existing texture pattern (knockdown, orange peel, smooth) and match it during the finishing stage.
Is DIY installation realistic for a full room?
Hanging and finishing full sheets to a flat, texture-matched result is a heavier undertaking than small patches and is where most DIY attempts fall short.
What's the difference between installation and repair?
Installation covers new walls or full-section replacement; repair covers patching existing drywall that's still structurally sound.
More services
Other Drywall Repair services
Drywall Repair
Drywall repair in Star, ID: crack patching, hole repair, and texture matching with a paint-ready finish. Free estimates.
Sheetrock Repair
Sheetrock repair in Star, ID: panel replacement, seam taping, and texture blending for a durable, paint-ready wall. Free estimates.
Texture Matching
Texture matching in Star, ID for knockdown, orange peel, and popcorn finishes so a patch stays invisible. Free estimates.
Ask about Drywall Installation & Replacement
Tell us about the project and how to reach you.